What to do if the battery of an electronic cigarette is broken?

When the battery of an electronic cigarette is broken, many people will encounter this problem. Some people may not notice this at first when they start using it, but after a while, they will find that the broken battery can cause leakage. Therefore, we need to take measures to solve this problem. Today, I will tell you how to replace the "skin" of the electronic cigarette battery.

The steps are as follows:

First, purchase a new battery "skin" online. Completely tear off the damaged battery skin, then open the new battery "skin" and insert the battery into it.

Next, we need to adjust the battery up and down to ensure that the redundant length of the battery "skin" is roughly equal.

Then, take out a heat gun or hair dryer and adjust the temperature and mode of the air outlet. Wrap the battery "skin" around the battery and start blowing, it is recommended to blow the negative pole first.

Continue blowing, then blow the positive pole. The battery "skin" will shrink inward due to the hot air. Be sure to press the small ring on the positive pole of the battery, the temperature doesn't need to be too high, and stop blowing after the battery "skin" shrinks, making sure the insulating small ring is in the correct position.

Stand the battery upright or place it on the ground, and start blowing the side of the battery.

After completing the above steps, you have successfully replaced the new "skin" for the electronic cigarette battery!

When using an electronic cigarette, it is necessary to pay attention to maintenance in order to extend its service life.