Zinwi > News >E-liquid News > How to empty your ejuice tank pressure?

How to empty your ejuice tank pressure?

E-liquid News

One of the most common problems that vapers often face is the need to empty their e-juice tanks. Whether you need to change flavors, replace a burnt coil, or clean your device, you need to get rid of the old liquid first. While it may seem like a simple task, emptying your e-juice tank can sometimes be a messy and frustrating experience. What's more, if you don't do it correctly, you risk damaging your vape device, wasting e-juice, or even hurting yourself. This article aims to provide a comprehensive guide on how to empty your e-juice tank pressure both safely and efficiently.

Step 1: Turn off Your Device

The first thing you want to do when emptying your e-juice tank is to turn off your device. This step is essential to prevent accidental firing, which can result in injury or device damage. You can either turn off your device by pressing the power button multiple times or by removing the batteries if you use a mod with a removable battery.

Zinwi - How to empty your ejuice tank pressure

Step 2: Unscrew the Tank

Once your device is turned off, it's time to remove the e-juice tank. Unscrew the tank from your device, and this will allow you to access the e-juice inside. Make sure that you have a clean surface or a towel to work on since some liquid may drip out.

Step 3: Drain the Remaining Liquid

Before you can refill your tank, you need to empty the remaining liquid. If you plan on reusing the same flavor, you can save the liquid by pouring it into a clean bottle. However, if you intend to switch to a different flavor, you need to dispose of the liquid properly. You can do this by pouring the remaining e-juice into a bottle with a secure cap and placing it in the trash.

Step 4: Disassemble the Tank

Once you have drained the remaining liquid, you need to disassemble the tank further. This will give you access to the coils and allow you to clean the tank thoroughly. Some e-juice tanks are straightforward to disassemble, while others can be a bit tricky. Check your device's user manual to learn how to disassemble your tank correctly.

Step 5: Remove the Coils

After you have disassembled the tank, remove the coils from the tank. Make sure that they are disposed of properly. If they are still in good condition, you can save them for reuse.

Step 6: Clean the Tank

Cleaning your tank is an essential step in ensuring the best vaping experience. To clean your tank, you need to rinse it thoroughly with warm water. Be careful with the seals and o-rings, as they can be easily damaged. Also, avoid using soap or other cleaning agents, as they can affect the e-juice's taste. After washing, let your tank dry completely.

Step 7: Reassemble the Tank

Once your tank is clean and dry, it's time to reassemble it. Follow the instructions in your device's user manual to reassemble the tank correctly. Make sure that all seals and o-rings are in the right place, as they need to create a tight seal to prevent leakage.

Step 8: Prime your Coils

Before you refill your tank, you need to prime your coils. This process involves saturating the coils fully with e-juice. To do this, apply a few drops of e-juice directly onto the coil and let it soak for a few minutes. This step is essential to prevent dry hits and ensure that your coils last longer.

Step 9: Refill your Tank

Once your coils are primed, you can refill your tank with fresh e-juice. Be careful not to overfill, as this can lead to leakage. Also, make sure that the e-juice you use matches the tank's specifications to avoid damaging the coils.

Step 10: Let it Sit

After refilling your tank, let it sit for a few minutes before using it. This gives the e-juice time to saturate the wick fully and prevents dry hits. You can also take this time to adjust the device's settings or clean up any mess you made during the process.


Emptying your e-juice tank pressure may seem like a daunting task, but it's relatively easy if you follow the steps above. Make sure that you turn off your device before unscrewing your tank to avoid accidental firing. Drain the remaining liquid and disassemble the tank to clean it thoroughly. Remember to prime your coils and refill your tank before letting it sit. Following these steps will ensure that your device functions correctly and allow you to enjoy a fresh vaping experience.

Zinwi - E-LIQUID OEM/ODM Manufacturer

Business Consulting
E-Liquid ODM/OEM Customization Requirements
Your Name*
Phone Number*
Email Address*
Submitted successfully
We will contact you as soon as possible
Welcome to follow our social media account to get Zinwi News!
You must be 21+ to enter this site!