How to add ejuice to cks via tank

Vaping has become an increasingly popular alternative to traditional smoking, and with good reason. Vaping has been shown to be less harmful than smoking, and some people even find it to be a more enjoyable experience. However, if you're new to vaping, you may find it difficult to figure out how to add e-juice to your device. In this essay, we'll walk you through the process of adding e-juice to your CKS vape device via tank.

Firstly, let's talk a little bit about the components of the tank. Your CKS vape device likely comes with a tank, which is the part of the device that holds the e-juice. Most tanks are made up of a few key components, including the tank itself, the coil, and the drip tip. The tank is the part of the device that holds the e-juice, and it usually has a capacity of around 2-5ml. The coil is the heating element that vaporizes the e-juice, and the drip tip is the part that you put your mouth on to inhale the vapor.

Now, let's get into the process of adding e-juice to your tank. The first step is to make sure that your tank is empty. If it’s not, you'll need to empty it before you can add new e-juice. To do this, simply remove the tank from your device and turn it upside down over a sink or trash can. The e-juice should flow out of the tank.

Once your tank is empty, you can add your new e-juice. To do this, locate the fill ports on your tank. These are usually located on the top or side of the tank and will be covered by a small rubber plug or metal cap. Remove the cap or plug to access the fill port.

Next, take your e-juice bottle and carefully place the tip into the fill port. Slowly squeeze the bottle to add e-juice to the tank. Be careful not to overfill the tank, as this can lead to leaks or other issues. It's generally a good idea to only fill the tank about 3/4 of the way full.

Once you've added your e-juice, replace the cap or plug on the fill port. Give the tank a gentle shake to ensure that the e-juice is evenly distributed.

Now, it's time to prime your coil. Priming your coil is an important step that helps to ensure that your coil is properly saturated with e-juice. To prime your coil, start by adding a few drops of e-juice directly onto the coil. This will help to saturate the cotton wick in the coil.

Next, reattach the tank to your device. Allow the device to sit for a few minutes to allow the e-juice to fully saturate the coil. This will help to prevent a dry hit, which can be a harsh, unpleasant experience.

Once your coil is primed and your e-juice is fully saturated, you're ready to start vaping. Simply press the fire button on your device and inhale through the drip tip. You should be able to taste the flavor of your e-juice and feel a satisfying amount of vapor.

In conclusion, adding e-juice to your CKS vape device via tank is a relatively simple process. The key is to take your time and be careful not to overfill the tank or prime the coil too quickly. With a little practice, you'll soon be able to add e-juice to your device like a pro and enjoy a satisfying vaping experience.