How make your own diy sweetener for ejuice

As vaping has become more popular as a smoking cessation tool, an increasing number of ex-smokers are turning to DIY e-juice making in order to save money and create a customized vaping experience. E-juice is the liquid that is vaporized by an electronic cigarette, or e-cigarette, and comes in a variety of flavors and strengths. One aspect that DIY e-juice makers can stipulate is the use of their own sweeteners. Here is a step-by-step guide on how to make your own DIY sweetener for e-juice.

First, you'll need to gather the necessary equipment. You'll need a kitchen scale, a graduated cylinder or syringe, and some basic chemistry equipment such as gloves, goggles, and a pH meter.

Next, you'll need to choose your sweetener. There are many options available in the market, but the most popular include sucralose, ethyl maltol, and stevia. Sucralose is a synthetic sweetener that is 600 times sweeter than sugar. Ethyl maltol is an organic compound that is derived from maltol and is often used in the candy industry. Stevia is a natural sweetener that is derived from the stevia plant.

Once you've chosen your sweetener, you'll need to determine how much you'll need. The amount will depend on how much e-juice you intend to sweeten and how strong you want the sweetness to be. As a general rule of thumb, it's recommended that you start with a small amount and work your way up. For example, for every 10ml of e-juice, you could start with 0.5g of sweetener.

Next, you'll want to dilute your sweetener in a mixture of propylene glycol (PG) and vegetable glycerin (VG). This is important because adding pure sweetener to your e-juice can cause it to caramelize and burn out your coil, which results in a burnt taste. Diluting your sweetener in a PG and VG solution will prevent this from happening.

To make your PG and VG solution, you'll need to measure out equal parts of PG and VG by weight. For example, if you're making 10ml of e-juice, you'll need 5ml of PG and 5ml of VG. Once you've measured out your PG and VG, mix them together in a bottle and shake well.

Next, you'll want to weigh out your sweetener and add it to the PG and VG solution. Make sure to wear gloves and goggles during this process as the sweetener is highly concentrated and can be dangerous if it comes into contact with your skin or eyes.

Once you've added your sweetener to the PG and VG solution, stir it well until the sweetener has dissolved. You can use a magnetic stirrer or a hot plate to speed up the process.

Finally, you'll want to test the pH of your sweetener solution. A pH of 7 is neutral, while anything below 7 is acidic and anything above 7 is basic. A pH meter can be used to measure the pH of your solution, which should ideally be around 7.

Once you've tested the pH of your sweetener solution, you can add it to your e-juice. Make sure to shake your e-juice well before vaping, as the sweetener can settle at the bottom of the bottle.

In conclusion, making your own DIY sweetener for e-juice is relatively easy and can be done with common household items. It's important to choose a sweetener that suits your taste preference and to dilute it in a PG and VG solution in order to prevent it from caramelizing and burning out your coil. Remember to test the pH of your sweetener solution and to wear gloves and goggles during the process. With a little patience and practice, you can create your own customized sweetener that will take your vaping experience to the next level.