If your e-cigarette accidentally gets wet, don't worry, here are the steps to handle it.
Firstly, separate the cartridge from the body of the e-cigarette.
When the e-cigarette gets wet, it should be retrieved immediately. Then, separate the cartridge and the device to avoid the electrodes from coming into contact again and damaging the circuitry.
Next, dry the e-cigarette body.
After completing the first step, you should immediately learn how to remove the water from the e-cigarette body. If you have a hairdryer, you can blow cool air through the e-cigarette body to dry out the water, but remember not to use hot air, as it can damage the circuit board. If you don't have a hairdryer, you can try using tissue paper and manually blowing air through the pipe. After drying it out, let the e-cigarette body sit for a few minutes until it is completely dry before proceeding to the next step.
Finally, check if the e-cigarette body is functional.
After completing the above steps, the next step is to check whether the e-cigarette body is damaged. After confirming that the e-cigarette body is completely dry, put the cartridge back onto the e-cigarette body and observe the changes in the indicator light. Generally, after replacing the cartridge, the indicator light will turn white. If the indicator light turns red after you put the cartridge back, it indicates that there is a problem. Then try taking a few puffs from the e-cigarette, if the indicator light turns back to white and you can smoke normally, it means there is no problem. However, if the indicator light remains red and you are unable to smoke, it means that the circuit board inside the e-cigarette body may have short-circuited due to water damage. If the e-cigarette body is damaged by water, all of the above methods will be ineffective and you will need to seek after-sales service.